Complete circles (ie arcs with a sweep of 360 degrees) are omitted when previewing a *.ZCC (Zund cut center) file, in the Zund Cut Queue application.
Arcs with a sweep of less than 360 degrees are unaffected.
Other file formats (CFF2, DXF, PDF, HPGL etc) are unaffected, regardless of the sweep of the arc.
Symptoms
Complete circles are visible in the Impact drawing:
Example Impact drawing with complete circles
The same circles are not visible in the Zund cut center preview:
Preview in ZCC Cut Queue - complete circles omitted
Cause
This is caused by an issue with the Zund ZCC software itself and has yet to be addressed (by Zund).
Solution
Within all affected Post Processors, head to the Explode node and enable Arcs to > quad segments option:
Explode>Arcs to Post-Processor options
Click OK and re-try the plot:
Preview in ZCC Cut Queue - complete circles included
Still Not Working
Close & re-open the current project and then re-try the plot.
If the above solution has not resolved your problem, you may have found another cause of this error. Please create a support ticket and describe the problem you're having in as much details as you can. You may be asked to provide the following information so to expedite a solution, it would be useful if you could add the appropriate information to your ticket.
- The date and time the problem occurred and the user name or names that has experienced the problem.
- Screenshots showing the problem including the entire site and address bar. Please do not zoom in on an area as important information can be easily missed.
- A screen recording of you reproducing the problem.