Machine Attributes - mruleset - Rule Processing Machine
These are the settings that apply to the rule processing machine that is attached to the mruleset machine.
Rule Processing Machine
Machine type
Hugo, Marba NC, Hugo VI, BB020, Datatech or Linbend; from the pulldown list select the rule processing machine type.
Tool 1
Type
Notch, Bridge, None, Bridge as is, Perforation or Perforation as is; from the pulldown list select the tool type.
Width
Enter the tool width.
Overlap
Enter the overlap that needs to be applied for multiple tool cuts.
Upper tolerance
Enter the upper tolerance that is to be applied to this tool.
Lower tolerance
Enter the lower tolerance that is to be applied to this tool.
Tool 2
Type
Notch, Bridge, None, Bridge as is, Perforation or Perforation as is; from the pulldown list select the tool type.
Width
Enter the tool width.
Overlap
Enter the overlap that needs to be applied for multiple tool cuts.
Upper tolerance
Enter the upper tolerance that is to be applied to this tool.
Lower tolerance
Enter the lower tolerance that is to be applied to this tool.
Tool 3
Type
Notch, Bridge, None, Bridge as is, Perforation or Perforation as is; from the pulldown list select the tool type.
Width
Enter the tool width.
Overlap
Enter the overlap that needs to be applied for multiple tool cuts.
Upper tolerance
Enter the upper tolerance that is to be applied to this tool.
Lower tolerance
Enter the lower tolerance that is to be applied to this tool.