This is a sub-page from the Stripper System - Restrictions page.
Stripper System - Restrictions - Radii
These settings define the shape and size of Radius restrictions. They are defined for both Inside and Outside/Perimeter strippers. You can set the Outside to be the same as the Inside by switching on the As above option.
Radius (Width)
This is the default value for the radius of the restriction.
If materials have been defined, Material specific overrides can be made for this value by clicking the 
Material button.
Depth
This is the default value for the depth of the restriction.
If materials have been defined, Material specific overrides can be made for this value by clicking the 
Material button.
Male Component Offset
This is the distance between the restriction and the anchor for any dynamic stripping component placed relative to it
If materials have been defined, Material specific overrides can be made for this value by clicking the 
Material button.