This is a sub-page from the Blanker Wizard form.
Blanker - Bars
To layer
The bar geometry can be transferred to another layer by checking this option. If this option is not checked, the geometry will be added to the current layer.
Layer name
From the pulldown list choose the layer or enter the layer name required.
Sub-blocks
This option determines if the bar geometry created will be added to a sub-block.
Block name
Enter the block name for the bar geometry.
Palette
From the pulldown list choose the palette for the bar geometry.
Centre palettes
From the double palette list choose the palettes that can be considered for the bar centre palette.
Bar Auto Fillet Multiplier
When creating bars, if you choose Auto fillet, then they will be created with fillets that are the width of the bar multiplied by this value.
Default centre palette
The pulldown list will only contain the palettes selected in the Centre palettes list. Choose the required one.
Side symbol
Use the Symbol Select form to select a symbol to connect the horizontal frame bars to the frame.
Side symbol offset
Enter the distance to offset the insertion point of the symbol from the intersection point of the bar and the frame.
Bottom symbol
Use the Symbol Select form to select a symbol to connect the vertical frame bars to the bottom of the frame.
Bottom symbol offset
Enter the distance to offset the insertion point of the symbol from the intersection point of the bar and the bottom of the frame.
Top symbol
Use the Symbol Select form to select a symbol to connect the vertical frame bars to the top of the frame.
Top symbol offset
Enter the distance to offset the insertion point of the symbol from the intersection point of the bar and the top of the frame.
Symbol placement
This option allows you to choose how the symbols should be placed relative to the bar. From the pulldown list choose Centre, Left edge or Right edge.