Open navigation

Strip Clip - SC10

Stripper System - Restrictions - Strip Clip - SC10

These settings define the shape and size of StripClip SC10 (white clip) restrictions. They are defined for both Inside and Outside/Perimeter strippers. You can set the Outside to be the same as the Inside by switching on the As above option.

Width

This is the default value for the width of the restriction.

Depth

This is the default value for the depth of the restriction.  There are vertical (V) and horizontal (H) options which can be set independently.

If materials have been defined, material specific overrides can be made for this value by clicking the  Material button.

Female Symbol

This allows you to select a symbol to be inserted to show the female part.  This will insert a symbol that is intended as a visual aid.  The symbol is inserted relative to the default Depth (V) offset.

Male Component Offset

This is the distance between the restriction and the anchor for any dynamic stripping component placed relative to it. There are vertical (V) and horizontal (H) options which can be set independently.

If materials have been defined, material specific overrides can be made for this value by clicking the  Material button.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

You may like to read -