Strip System - Breakers - First Knife
These settings define the shape and size of First Knife breaker restrictions.
Depth
This is the default value for the depth of the restriction.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.
Solitaire
Up to
Specifies the maximum trim distance for which this style of restriction should be auto selected.
Edge distance
This is the distance between the female profile and the anchor for any dynamic stripping component placed relative to it, and the default width of any restriction placed.
Multiple
Up to
Specifies the maximum trim distance for which this style of restriction should be auto selected.
Edge distance
This is the distance between the female profile and the anchor for any dynamic stripping component placed relative to it for this style of restriction.
Two Spaced Restrictions (Cluster A)
Up to
Specifies the maximum trim distance for which this style of restriction should be auto selected.
Spacing
This is the distance between the two restrictions.
Two End Restrictions (Cluster B)
Distance to trim
This is the distance between the edge of the trim and the restriction that is placed at the trim end.
Male Component Offset
This is the distance between the restriction and the anchor for any dynamic stripping component placed relative to it.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.