Stripper System - Breakers - Riding Knife Simple
These settings define the shape and size of Riding Knife Simple breaker restrictions.
Neighbour distance
This allows you to define a distance to insert a side restriction either side of this part.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.
Sides
From the pulldown list, select the side restriction required; choose either a pair of Simple restrictions, the neighbour distance away from the breaker, or <None>.
Male Component Offset
This is the distance between the restriction and the anchor for any dynamic stripping component placed relative to it.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.
Ruled Part
If this option is checked, the entities will be added to the female to insert a riding knife.
Dist 1
This is the length of the first entity (in line with the breaker) in the ruled part.
Dist 2
This is the length of the second entity in the ruled part.
Angle
This is the angle of the second entity in the ruled part relative to the first.
Palette
This is the palette to use for the ruled part.
Symbol
This option allows you to optionally define a symbol to be included with the ruled part.
Distance
This is the distance away from the end of the second entity in the ruled part where the symbol will be inserted.